Locking the High-Lift Jack

-

  I love my high-lift jack. But others do as well, and mounted in the bed of my truck makes an appealing target for thieves. Therefore, I need to lock it up. I looked into the locking knob/handles for the mounting system I purchased, but they're pretty pricey. I needed a cheaper solution, which led me to peruse all the chains and locks I've pack-ratted away in the garage for years. 

Long story short, here's what I ended up with. Is it ideal? No, not really. A determined thief could still cut the chain, bolt-cut the lock or hacksaw the tie-down loop in the bed. And I've now got a chain taking up some of the tie-down loop space. Oh, and the chain is going to rattle around in the bed as I drive down the road. But this solution is very inexpensive and should serve my needs. 

Comments

Post a Comment

Popular posts from this blog

Holding Stuff Down - Cargo Net for the Gladiator's Bed

-
Image
As mentioned before in this blog, one thing I'm still getting used to with the new Jeep is how little cargo space there is. We're going up to our cabin this coming weekend, and we're bringing two full-grown adults to accompany my wife and myself. Four people are a tight squeeze in the vehicle's cab, which means all of our combined gear, cooler, etc. that normally would live in the back seat area will have to ride in the truck's bed. Combined with highway, bumpy washboard dirt roads, and of course rock crawling... well, stuff can leave the bed on its own accord if not properly secured. To address this issue, I purchased a heavy-duty cargo net that I'll keep in the toolbox and use in instances like this upcoming weekend jaunt. The unit I purchased was a Mophorn 50"x66" heavy duty cargo net that came with four tied down straps and carabiners. It's probably too big for typical loads (e.g., coolers and such) but I erred on the side of too big, rather th...
Read more

Stowing a Recovery Shovel

-
Image
An indispensable recovery tool every serious offroad vehicle should carry is a good shovel. I've only had to use a shovel once in an emergency off-road situation--but it was truly needed that time. Unfortunately, the shovel I had at the time was a tiny "fold-up" camp model that I kept in my truck's tool box. It was way too small for the job at hand, taking close to 30 minutes to dig us out of a sandy rut that should have taken, at most, 5 minutes with a properly sized tool. So... for the Gladiator, I decided it was time to carry a bigger implement for the (hopefully rare) times when I will need it. I chose a modest 36-inch model that we already had sitting unused in a shed. The bad news is that because of the constraints of the tool box size on the Gladiator, I can't keep it locked up inside. Instead, I have to keep the shovel in the truck's bed. The solution I settled on is to use a "quick fist" rubber tool mount that is screwed directly into the si...
Read more

Headache Bar and Rails

-
Image
 First: I love my decked system. It's really good. I like how much equipment I can store and the super easy access to everything. But there are a couple of downsides to the unit. First, is that when the drawer is extended (out), I can't use the tailgate as a pseudo workbench, which is what I typically do when at a remote location like our cabin. This is one of those "duh!" moments; I should have realized it. The fix is to find some other surface to work from and/or carry/build some kind of portable work table with me.  The second issue is what I call the "bed depth" issue. The decked unit takes up about 12-inches of useable depth in the bed. This means things that one could just toss in the back no longer are really secure when driving down the road. In fact, there's only about 4-inches of effective bed depth for containing a load that I put on top of the decked drawers.  The solution to this latter problem is to build a headache bar and side rails that ...
Read more